Hardware

[SimpleDMX]

SDC works with most USB or Art-Net DMX hardware – you’re not locked into any specific brand or device. You can use SDC for free in 2-hour sessions, so you can test compatibility with your own hardware before purchasing a license. Below you’ll find devices we have personally tested and confirmed working.

Enttec DIN Ethergate Mk2
Art-Net and sACN node that converts ethernet to up to 2 DMX universes.


EUROLITE DXT PoE Art-Net Node I
Art-Net interface for control of 512 DMX channels.


Enttec DMX USB Pro
USB-to-DMX interface with a built-in processor for a stable, reliable signal.


UROLITE USB-DMX PRO MK2
USB-to-DMX interface with a built-in processor for a stable, reliable signal.


EUROLITE USB-DMX PRO
USB-to-DMX cable with a built-in processor for a stable, reliable signal.


Enttec Open DMX USB
Low-cost USB-to-DMX interface with no built-in processor.


EUROLITE USB-DMX
Low-cost USB-to-DMX cable with no built-in processor.


Enttec OCTO MK2
Art-Net and sACN to SPI pixel controller with 2 outputs and up to 8 universes.


EUROLITE DXT Pixel Art-Net Node IV
Art-Net interface for control of 50000 digital LED channels.


EUROLITE DXT DMX Pixel Converter PRO, male connector
Compact DMX converter for LED pixel strips.


Akai APC Mini MK2
Compact USB MIDI controller with 64 RGB pads & 9 faders – supported for palette and scene fader controls.